Innovation that
doesn’t cost the earth
doesn’t cost the earth
Our Products
Questions?Let Us Help
Simply choose a support option from the icons below:
+86-571-86925866
sales-jit
sales-jit
Factory : No. 7, SongQuan East Road, XuanZhou Economic Development Zone, XuanCheng City, AnHui Province, China
Zip Code: 242000
Office : Room 2308, KEYA Time Square, No.1712 XueLin Street, XiaSha Eco & Tech Zone, HangZhou City, ZheJiang Province, China
Zip Code 310018
Application
You are here: Home > Application
JIT board-solid walls
JIT boards can be applied directly to solid walls simply with tile adhesive. JIT boards are an ideal way to cut down on the heat lost through solid walls. Buildings with solid walls and without cavity will feel a considerable difference in room temperature when coated with JIT boards . JIT boards are very easy to install, as they are lightweight and very easy to cut to size with a saw or knife.
INSTALLTION STEP:
INSTALLTION STEP:
STEP1:
Make sure the surface of the wall is smooth and clean,without any grease or dust.
Make sure the surface of the wall is smooth and clean,without any grease or dust.
STEP2:
To smear the bonding mortar evenly on the back of every board.
To smear the bonding mortar evenly on the back of every board.
STEP3:
Stick the board to the wall and pat the board gently,making it adhere to wall firmly.
Stick the board to the wall and pat the board gently,making it adhere to wall firmly.
STEP4:
Before the mortar is dried,use the guiding rule and adjust the positin of the boards,make sure the boards are on the same level.
Before the mortar is dried,use the guiding rule and adjust the positin of the boards,make sure the boards are on the same level.
STEP5:
Use self-adhesive gridding cloth to bond the gaps between two boards and the apertures the boards and the ground,and then coat the grid cloth with a thin layer of mortar.In places where have very high demand for waterproof properties,you can treat and reinforce with professional waterproof belt and waterproof coating.
Use self-adhesive gridding cloth to bond the gaps between two boards and the apertures the boards and the ground,and then coat the grid cloth with a thin layer of mortar.In places where have very high demand for waterproof properties,you can treat and reinforce with professional waterproof belt and waterproof coating.
STEP6:
After the boards bonded to the wall,and the mortar has beed completely dry,tilling the wall begins.
After the boards bonded to the wall,and the mortar has beed completely dry,tilling the wall begins.
